Aluminum Window Machine

Product Description

1).The machine is the special equipment used for PVC and Aluminum profile milling, it can be used for special-shaped screw-connected Aluminum and PVC transom end milling, as well end milling of other assembling technology.

2). By changing cutters, it can mill different sections, it is suitable for the PVC and Aluminum window and door batch proessing. 

3).You make PVC or Aluminum window dor, this end milling machine is necessary for both production, this machine is used to mill the mullion proifle. This machine is iportant to make the window mullion(window middle support).

4).Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.

Products introduction

1).It can be used for end milling of profiles for aluminum doors and windows.

2).With a large-sized work bench and long cutting feed travel, it can mill 6--10 profiles in one operation with adjustable multiple cutting tools.

3).it is unnecessary to replace the cutting tools in case of product change so as to save the production setup period and cost of cutting tools.

4).Multiple sets of cutting tools can work simultaneously or separately based on different profiles,

5).With bigger diameter of cutting tools, the quality of machining surface is better, the hydraulic damping cylinder is used to push the feed of cutting tools to enable more stable operations.

6).The thickened clamping plate can prevent the profiles from deforming.

7).Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.

Equipment features

1).The machine can be used to assemble aluminum doors and windows and can complete punching and riveting connection of two corners in one operation with high production efficiency.

2).The clamping and positioning device can be adjusted vertically and is applicable to profiles of various sizes and sections with excellent universality, High-precision linear bearing motivation pairs are adopted with high precision of corner combining the hydraulic system is adopted with big punching and reverting force and high strength of corner connection.

3).We also have single head combining machine, if your production is not large, in beginning you can use the single head combining machine is ok.

4).Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.

 Equipment features

1). The machine is used for production line of hi-grade alu-alloy doors and windows. mainly used for extrusion and connection of 90º seam casement window with angle jointing operation, place an angle-alu in cavities of two driven striking blocks punch towards the flute of angle-alu, Extruding the seam of two profiles makes strength, efficiency and precision of the connection higher than using any means for connection.

2).This machine is used for combining the aluminum profile together to be a whole frame after processed.

3).We also have double head corner combining machine, and four corner combining machine, if you need, I can also list in the quotation, but generally, from begining production, use the single head type is enough for your Aluminum window door production.

4).Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.

5).We have in store, if you need, we can ship in short time for you.

Products introduction:

1). It is a full automatic machine specially used to cut the profiles of aluminum doors and windows at angles.

2). After you manually install the profiles, all the other operations are automatic there is of cut quantity the main spindle of machine is manufactured by the specialized manufacturer of main spindle of the machining center, the guiding and clamping device ensures no residual sharp comers even in cutting 3mm long comers.

3). Hydraulic damping cylinder is equipped to drive the feeds for cutting the machine body adopts integral construction with good rigidity.

4). This model can cut the max. Width is 140mm alumiunm corner connector profile, if your width is more than this 140mm, you can tell me, I can give you the other models.

5). Before you buy the machine, please make sure then tell me your local power supply, then we can make the right according to your true voltage.   

Function:

Used for corner key/ connector of aluminum profile and plastic profile cutting.

Introduction

Double-head precision miter Saw machine(Digital display) is used for cutting aluminum profiles. The main spindle is manufactured by the specialized manufacturer. And the imported linear bearing motional pair is used to move the head horizontally. The blade feeding is hydraulic damping drive with large processing range. And the maximum cutting length is 4200mm. The cutting angle is 22.5 angle ,45 angle and 90 angles

Introduction

Miter Saws work equipment used for cutting. Miter saws are very important for various types of carpentry work. They are used to create the perfect piece to form the elbow and the side frame. Basic miter saw that has a limited capacity cuts. Miter saws that have different types to provide the most versatile cutting options. But, from various types of miter saw,  double miter saw is the most applications.

Introduction

Double-head Saw machine is used for cutting aluminum profiles. The main spindle is manufactured by the specialized manufacturer. And the imported linear bearing motional pair is used to move the head horizontally. The blade feeding is hydraulic damping drive with large processing range. And the maximum cutting length is 3700mm. The cutting angle is 45 angle and 90 angles

Features

Used for aluminum profile cutting.

2. The linear guiding pair ensured steady processing accuracy.
3. Saw blade rotate smoothly due to high accuracy main spindle.
4. Uniform speed feeding and smooth motion due to airdraulic damping cylinder.
5. It has feature of easy operation, reliable performance, advanced technique and convenient maintenance ect.
6. Right head moving saw blade give accurate processing and high efficiency.
7. Imported carbide saw blade give accurate processing and high efficiency.
8. Two head can work together or single, when together work , one tine. can cut off the required length and angle

Products introduction:

The machine is used for 45°~90°cutting processing of aluminum profile with single saw head.And the speed can be adjusted. It features swinging feeding and high cutting precision.The moves agility. and can be locked in the loction what do you need.